TS-1032G
TS-1032G
Single Flavor Freezer
1.Cooperated with multiple sensors, electronic expansion valve is capable to optimize the operating conditions of the compressor
TS-1032 series are equipped with electronic expansion valves. ACEICE develops control strategies based on the characteristics of the ice cream machine, improving cooling power as well as expanding the material adaptability comprehensively.
Compared with the traditional thermal expansion valve, the electronic expansion valve can actively adjust the evaporation pressure, control the depth of refrigeration accurately according to the state of the material, maximize the refrigeration efficiency, and also reduce the risk of overload and overheating, extending service life of the compressor.
PWM speed control fan is optional for TS-1032G, it can change speed steplessly in the range from 500RPM to 3000RPM according to the load. In most cases, the noise level will be lower than the fixed speed model, and the cooling effect is better when the ambient temperature is extremely high or low.
2.Using the 3rd generation patented air pump technology to provide consistent high quality
TS-1032 series use the 3rd generation air pump technology to provide a more stable product quality than the previous models. Now the machine can achieve good overrun immediately even if it just start running, and the quality reduction during long-term standby is effectively suppressed.
The structure of the feeding tube has been fully optimized. Compared with the previous design, the number of parts is reduced, and the operation is simpler and easier to clean.
3.Efficient pre-cooling system can quickly cool the materials to below 4¡ãC and keep the material fresh for a long time
TS-1032 equips with a 8 liters hopper with quick pre-cooling function, which can cool the mix in the hopper to below 4¡ãC in only about 30 minutes, thereby providing better continuous production capacity.
The improved hopper stirring blade can thoroughly mix the material in the hopper, avoiding the layered precipitation of the material.
The fresh-keeping standby function eliminates the operation of daily cleaning and reduce the waste of material.
4.The removable dust filter can efficiently filter the dust in the air, which is convenient to clean and keep the interior of the machine tidy
TS-1032 continues the heat dissipation design of the previous model. Cool air is drawn through the bottom and discharged from the exhaust vent on the top. This design ensures good heat dissipation of the internal parts and no surface on the fuselage will be heated when the machine is working. It will not affect other equipment on both sides. This means that you have no worry to put TS-1032 close to other equipment or a wall, so you can save desktop space and place it as you want.
Compared with the previous model, TS-1032 optimizes the internal structure to increase the ventilation flow by 35%, and integrates a removable dust filter that is easy to clean. It does not need to disassemble the machine when removing dust, and the interior of the machine remains clean after long-term use.
5.The pasteurization function can be set to run at a fixed time, with a cleaning interval of up to 14 days
Pasteurization function is optional for TS-1032G to sterilize the material both in the hopper and cylinder during non-business hours.
In the 14-day cleaning cycle, the only thing you need to do is to manually sterilize the outlet of the dispenser. Squeezing out the material to dismantle or wash the machine is not needed, which saves a lot of labor and material waste is minimized.
During sterilization, material is heated to 70¡ãC and kept for 30 minutes, and then cooled to below 4¡ãC as quickly as possible. With 5 liters of material remaining, TS-1032G is capable to accomplish the sterilization process within 3 hours, consuming only 1 kWh of electric power.
Compared with traditional ice cream machine, TS-1032G not only takes lead in sterilization speed and effectiveness, but also consume less power and has stronger stability.
6.Built-in LTE IoT (Internet of Things) network module, supports remote diagnosis and data record
Built-in IoT network module is optional for TS-1032G, which can record various parameters of the machine, you can check the working status of the machine in real time or watch replay at anytime on web browser.Also you can customize notification as needed when anything unusual occurs.
Professional engineers are able to remotely analyze the fault of the machine and give you the most accurate suggestions or change the settings for you, so that problems can be solved as quickly as possible, avoiding the tediousness of repeated communication.
7.New touch screen user interface, simple to use & thorough protection
A simple and straightforward graphical user interface is designed to reflect the machine's working status and various parameters in detail. The machine will automatically stop or take action when an error is detected. The built-in fault diagnosis operation guide can give the user the process to eliminate the fault when a specific error occurs.
8.Using high-quality components to achieve extraordinary durability
The Embraco compressor imported from Europe achieves high cooling capacity in a small fuselage with operating noise <60dB.
The body structure and cover parts are all made of stainless steel, which can last as long as the new even in harsh environment.
The twin balanced scraper stirring shaft runs smoothly and produces delicate products. Foolproof design prevents installation errors, its reliability has been tried and tested for many years.
The stirring shaft is power by a strengthened three-phase dash motor driven by inverter through a maintenance-free worm gear reducer, which has no start-up vibration and strong anti-overload capability.
Technical Parameters
Power Supply 1ph 220V~
Total Power 1.07 kW
Hopper Capacity 8 L
Cylinder Capacity 1.3 L
Rated Capacity 24 L/h
Weight 56 kg